Common Reasons That a Weld Breaks

Technological advances and better training for welders have greatly improved the quality of welding over the past few decades. However, nothing is perfect, even when it comes to welding in Memphis, TN. There are countless examples of broken welds out there. But why do these breaks happen, and who can fix them when they occur? Continue reading to find out. This post will cover the basics of what you need to know about broken welds:

• Wrong filler metal: Oftentimes, a break will occur simply because the welder used the incorrect filler metal while working. Though this could be avoided by hiring an experienced welder, we’re all human and make mistakes. Our advice to the welders out there is to always have a few different types of filler metal on hand just to be safe.
• Too much grinding: Everyone wants a smooth weld, and the best way to achieve that is to grind the weld down once you’re done. However, too much grinding can weaken the metal and cause it to break sooner than expected. Always take care when grinding, and keep in mind that too little grinding is likely better than too much.
• Not enough preheating: It’s usually necessary to preheat a weld to ensure that the weld is as strong as can be. This process takes a little bit of time, and some welders can get impatient. If the welder rushes through the job and doesn’t preheat the filler metal, you’ll end up with a weak weld that could break down the road. Again, you can usually avoid this problem by choosing an experienced and highly skilled welder.
• Too much heat: On the opposite end of the spectrum, too much heat can be just as problematic as not enough heat. Metal that’s heated to the wrong temperature can expand and contract too much, which results in a weak and unstable weld. A good welder knows the correct temperature to heat the metal to, and how long heat should be applied to the metal.

Why choose United Diesel Power – Truck Repair to repair your weld?

It doesn’t matter why your weld is broken—if it breaks, you’ll need to hire a pro to fix it. These are a few of the reasons our customers choose us any time they need help with welding in Memphis, TN:

• Expert knowledge: As we’ve seen above, many of the common causes of broken welds can be avoided by hiring the right welder. When you choose to work with us, you know you’re getting a welder who knows what he’s doing with the torch and will create the strongest possible weld.
• Fast service: Welds often break at the most inconvenient times, and when that happens, you don’t want to be stuck waiting around for your welder to finish the job. That’s not an issue with us. Though we work diligently to ensure strong welds, we perform jobs as efficiently as possible.
• Affordable prices: You can rest easy knowing that you’re not overpaying when you hire our welders. We offer competitive prices for all of our services.

Don’t choose anyone but United Diesel Power – Truck Repair the next time your weld breaks! Regardless of the type of metal, you can count on us to repair it in no time at all.

Categorised in: Welding Services

This post was written by Writer